Safety in Mechatronics lab.
1- Securely plug in pneumatic devices
2- Keep piston rod travel free
3- Check all connections before connecting the compressed air
4- Do not exceed the maximum pressure
5- Check working pressure
6- Be careful from the recoil risk
7- Do not completely unscrew the regulating screw
8- Tighten each locknut after setting the regulating screw
9- Never tighten the regulating screw with force
10- Never operate roller by hands
11- Connect the compressed air supply only when you complete all connections
12- Close off the compressed air supply before dismantle
13- Follow your teacher’s instructions for individual exercise
14- Tidy up all the components after finishing
15- Be careful from the electric supply
16- Connect the wires correctly according to the circuit to avoid the short circuits
17- Switch on the power supply after finishing all the connections
18- Switch off the power supply before dismantling the wires
19- Wear your safety glasses
15- Be careful from the electric supply
16- Connect the wires correctly according to the circuit to avoid the short circuits
17- Switch on the power supply after finishing all the connections
18- Switch off the power supply before dismantling the wires
19- Wear your safety glasses
No comments:
Post a Comment